| GEG-1699A 1. Product Description: This is a universal external battery pack, Applicable for 80% models of laptop, compatible with all digital devices charged by USB port. 2. Configuration This product made up of Lithium battery, 1pcs PCB board, and housing. Color: argent Weight: 900g Material: crust aluminum Dimension: Lmax220mm×Wmax130mm*Hmax21.3mm Button: the output voltage and capacity checking indicated through the same button. Indicator: 5 green LED to indicate the capacity. The last LED in green when full charged, it’s red when charging. Switch: voltage switch (16V,19V) Charge Port: DC port Discharge Port: USB, out DC port 3. Technic Parameter Capacity: 9900mAh Cell Voltage: 3.7 V Input Voltage: 16V,19V Output Current: 3.75A (16V) Output Voltage: 5V,16V,19V Output Power: 60W max Max Input Voltage: 25V Input Current: 2.5A max Cycle life: ≥300 times Charge Time: 7 hours Cycle type: Lithium polymer 4. Function & Usage Charge Attention: When charging, the model GEG1699A will output power directly to LOAD as per charging voltage. (namely charging and discharging simultaneously). If the charging voltage is higher or lower than LOAD rating voltage, it may damage LOAD. Therefore, when LOAD rating voltage is not equal to charging voltage, cannot connect with LOAD when charging. When choose the AC adaptor of 15-25W, can charge GEG1699A directly. Or use charging tips to charge. Charging indicator. Status: The indicator in RED when charging, in GREEN when full charge. Discharge Charging and discharging simultaneously. the output of WTEL1699A is as per charging voltage, not as per fixed voltage. Have to choose suitable voltage when charging. Normal discharging. Output when not charging, have to make sure the “optional switch” to the side of “VOL”. Press the button “VOL/ CHECK”, the indicator will show output voltage, after choosing, make sure the “ optional switch” to the side of “CHECK”. To connect LOAD then natural output. Attention: When low voltage, the indicator will flash and means low voltage, will power off soon. USB Output automatically: USB output continuously when charging and discharging. Output by hand: when not charging and discharging, make sure the “ optional switch” to the side of “check”, press the button” vol/ check”, USB start to output. If the USB LOAD is little(about 800mA), USB will power off automatically. Capacity checking Make “ Optional switch” to the side of “check”, press the button “VOL/ CHECK”. Will show capacity. The capacity chart is as below. Capacity/output indicator Capacity 1 LED blinks, 0≤RP≤10% 1 LED lights on 10%≤RP≤30% 2 LED lights on, 30%≤RP≤50% 3 LED lights on, 50%≤RP≤70% 4 LED lights on, 70%≤RP≤90% 5 LED lights on, 90% ≤RP≤100% 5. Safety Certification FCC CE 6. Accessories 1pcs output cable 1pcs 3.5×2mm, 19V, connector for: ASUS, ChemUSA, Compaq, TRIGEM 1pcs 4.75×1.7mm, 19V, connector for: ASUS, ChemUSA, Compaq, TRIGEM 1pcs 3.5×2mm, 19V, connector for: Acer/TI, Winbook 1pcs 5.5×1.7mm, 19V, connector for: Acer/TI, Winbook 1pcs 5.5×2.1mm, 19V, 16V, connector for: Acer/TI, ALPHA-TOP, Compaq , Gateway, IBM, ITRONIX, SAMSUNG, Toshiba 1pcs 3.5×2mm,19V,16V, connector for: Acer/TI, AMI,BAYCOM, ChemUSA, Compaq, DELL, Digital, E-Machine, EPSON, HITACHI, HP, IBM , JERBOOK, LEO, NEC, PRIMEBOOK, QUANTEX, Toshiba, VIEWSONIC, Winbook 1pcs 5.5×2.5mm,19V,connector for: Acer/TI, AMI,BAYCOM, ChemUSA, Compaq, DELL, Digital, E-Machine, EPSON, HITACHI, HP, IBM , JERBOOK, LEO, NEC, PRIMEBOOK, QUANTEX, Toshiba, VIEWSONIC, Winbook 1pcs 3.5×2mm, 19V, 16V connector for: AST, DELL , FUJITSU, HITACHI, PANASONIC, SAMSUNG,SONY 1pcs 3.5×2mm, 19V, connector for: ChemUSA , Toshiba, 1pcs 6.3×3mm, 19V, connector for ChemUSA , Toshiba, 1pcs 4×1.8mm, 19V, connector for DELL 1pcs 3P-HRS-A, 19V, connector for DELL 1pcs 3.5×2mm, 19V, connector for DELL 1pcs 7.4×6.5mm, 19V connector for DELL 7. User Manual and Package Package: blister clamshell + insert card User Manual: card printing + user manual book |
See more products from this supplier.
Do you want to show products of your own company? Join FREE now!